STEP 18 Remove two screws from the hard drive supporting bracket. Unplug left and right speakers. Slide the bracket to the direction shown by the red arrow. Lift up the keyboard and access the cable connector located under the keyboard. I would recommend to install the CPU back into the socket on the motherboard, to keep it safe.
|Date Added:||21 May 2014|
|File Size:||48.96 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Remove four screws from the laptop hinges. STEP 17 Disconnect the audio board cable from the motherboard.
Slide the bracket to the direction shown by the red arrow. Before you install the CPU do not satellite p10 to unlock the socket there satellite p10 a screw on the side of the socket.
Satellite PS Support | Toshiba
STEP 20 Remove four hex studs from the ports on the back of the laptop. Terms and Conditions Satellite p10 Policy. Remove two screws from the hard drive supporting bracket. Satellie three screws securing the cooling fans. satellite p10
STEP 6 Remove four screw from satellite p10 metal hard dive shield. STEP 21 Carefully lift up and remove the motherboard.
Remove the keyboard bezel with a sharp object.
You appear to be using an outdated browser
I would recommend to install the CPU back into the socket on the motherboard, to keep it safe. STEP 8 Remove all screws from the bottom of the laptop. Remove both memory modules. Separate the CPU from the heat sink with a flathead screwdriver. Lift up and remove the hard drive. STEP 9 Remove two screws satellite p10 the back side of the laptop. Remove four screws securing the hard drive caddy. You can use a small flathead astellite.
Remove five screws from the motherboard. Here’s another guide satellite p10 cleaning the heat sink. STEP 11 Remove satellite p10 from both hinge covers. Unplug the cable from the side of the modem. STEP 16 Lift up and remove the top cover assembly. Lift up the modem to disconnect it from the motherboard.
Satellite p10 the connector and pull the cable. Remove two screws securing the laptop modem.
STEP 1 Remove the battery. STEP 13 Remove one screw securing the video cable. Release satellite p10 screws on the heat sink. Slide the shield down and remove it from the laptop.
Remove the audio board with the cable.
STEP 19 Remove five screws from the motherboard. Disconnect the audio board cable from the motherboard.
Remove four screw from the metal hard dive shield. Unplug left and right speakers.